How to enter my Unlock Code on Samsung ?

galaxy6.png

How to Enter Unlock Codes on all Samsung Models

=================================

Please put non-accepted SIM, reboot your phone and when prompted enter NCK code

=================================

MM#6 message indicates the phone has been blocked because it's been reported stolen

MM#6 or MM6 error message = barred IMEI

=================================

You may have received one of the following codes;

NETWORK: NCK

Provider:

Sub-Provider: SP

De-Freeze: MCK

However 99% of the time NETWORK/NCK code is required.

Please put NON-Accepted SIM and when prompted enter NETWORK/NCK code.

================================= Special Method 1: If unsuccessful, please do a factory reset, enter UN/DE-FREEZE Code first, you should see unsuccessful message, now enter NETWORK Code, it should unlock the phone.

or if above didnt work

Special Method 2: If unsuccessful, please do a factory reset, enter UN/DE-FREEZE Code first, you should see unsuccessful message, now enter SUB-PROVIDER Code, it should unlock. =================================

Model: Samsung Galaxy S6

1 - Switch ON your Samsung with a non compatible SIM Card, 2 - Wait for your phone to ask for "SIM Network Unlock PIN" or "Enter Network Lock Control Key", 3 - If you receive one, please enter your MCK (Unfreeze Key) and hit "Unlock" button. Note: You will get "Unsuccessful message" but don't worry that's fine when you type MCK. 4 - Now type the NCK (Network Code) and hit the "Unlock" button. 5 - Your phone is now Unlocked !

EXTRA INSTRUCTIONS: if you get "Unsuccessful" again after type the NCK then:

7 - Hit "Dismiss" button and compose *2767*3855# on phone keypad. 8 - Wait for the phone to restart, this operation will erase all data from your phone! 9 - Retry the step 1 to 5 above ! ================================= Model: S3, Note 2, i437, i537, i547 rugby pro, S4 Active 4.2.2. (Try ALL CODE)

The method:

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06# a. Go to the Dial pad and dial *#197328640# b. Please click on number 1 UMTS > 1 Debugging screen > 8 Phone Control > 6 NETWORK LOCK c. You will see 3 options d. Please click on number 1 Perso Sha256 INFO, the screen will change slightly e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen f. Next Please click on number 2 Perso Sha256 ON, the screen will change again to a one line message g. Restart the phone on the screen by holding the power button and click RESTART h. When the phone prompts for the unlock code simply enter the unlock code provided to you i. Your phone is now permanently unlocked! ================================= Model: T999L. Galaxy Ace, T599 Mobilicity, T599N Metro PCS, Canadian S2, Canadian Note 1

Simulation S2 method:

First Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#197328640# b. Please click on number Debugging screen > Phone Control > SIMULATION > NETWORK LOCK c. You will see 3 - 4 options d. Please click on number 1 Perso Sha256 INFO, the screen will change slightly e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen f. Next Please click on number 2 Perso Sha256 ON, the screen will change again to a one line message g. Restart the phone on the screen by holding the power button and click RESTART h. When the phone prompts for the unlock code simply enter the unlock code provided to you i. Your phone is now permanently unlocked!

=================================

Different phones have different Unlock Code Input Instructions, Please try the following Instructions in Order:

Method #1 Insert a Non accepted simcard in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code

Note: Non Accepted Simcard is any simcard not from the original provider

OR

Method #2 Go to the dial screen on your phone as if you are going to make a call and press: #7465625*638*UNLOCKCODE# (8 digit unlock code)

OR

Method #3 Go to the dial screen on your phone as if you are going to make a call and press: #0111*UNLOCKCODE# (8 digit unlock code)

OR

Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625*638*# Once prompted for code, enter the 8 digit Unlock Code.

If Phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked

  • If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also pull the battery and restart phone.

How to Enter Defreeze Code for "Phone Freeze" Samsung Devices (only if your Samsung is Hard locked)

1. Input a non-accepted simcard into the phone. 2. Proceed to the dial screen. 3. Enter the De-Freeze code (Freeze code) and press enter, or okay. 4. The screen should now ask for the unlock code (Network Code). Enter the 8 digit unlock code and hit enter. OR 1. Turn phone on with an unaccepted SIM CARD 2. Screen will display €œPhone is freeze / SOS 3. Type the unfreeze code (Nothing will show on screen) 4. Hit the Enter Button 5. Phone will ask for the Network lock code 6. Enter it as you have received it 7. Phone will be unfreeze and unlocked

Trouble Shooting

"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

ONLY GALAXY S2, S3, Note, Note 2

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

1. Please make sure your phone prompts for the code.

2. If nothing you could proceed to use the "release method" on the phone(s):

a. Go to the Dial pad and dial *#197328640#

b. Please click on number 1 UMTS > 1 Debugging screen > 8 Phone Control > 6 NETWORK LOCK

c. You will see 3 options

d. Please click on number 1 Perso Sha256 INFO, the screen will change slightly

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

f. Please click on number 2 Perso Sha256 ON, the screen will change again to a one line message

g. Restart the phone on the screen by holding the power button and click RESTART

h. When the phone prompts for the unlock code simply enter the unlock code

i. Your phone is now permanently unlocked!

ONLY GALAXY S4

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#0011#

b. Please click your MENU button (Bottom LEFT button) and click BACK on the menu that appears, Nothing will happen do not worry please move to the next step

c. Please click your MENU button AGAIN and this time click KEY INPUT

d. When the Key input box appears please input the number "1" and hit OK

e. You will see a number 1 for a while, please wait until it changes into the SERVICE MENU

f. Please click 1 DEBUGGING SCREEN > 6 Phone Control > 6 Network LOCK

g. You will see 3 OPTIONS within Network LOCK

h. Please click on number 1 Perso Sha256 INFO, the screen will change slightly

i. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

j. Next Please click on number 2 Perso Sha256 ON, the screen will change again to a one line message

k. Restart the phone on the screen by holding the power button and click RESTART

l. When the phone prompts for the unlock code simply enter the unlock code provided to you

m. Your phone is now permanently unlocked!

How unfreeze Samsung GT-S5510:

1. Insert not supported SIM card.

2. Type DEFREEZE CODE e.g. 12345678 (no numbers on screen but it is ok) press ok. 3. Phone should ask for network code, type NETWORK code e.g. 12345678 and press ok.

If you have trouble to enter code and/or if code is not accepted on Samsung Android Phone like Samsung T959, then please try to make "Factory Reset" following the instructions below :

1 - Shut your Android Galaxy S down (Power off) or remove Battery.

2 - Now press Volume up, Home and Power together.

3 - If the Samsung Symbol is comming up leave the Home Button.

4 - Then there is a boot Menu

5 - Volume Up and Down to Navigate , Home to select the choosen option.

Our instructions are GLOBAL instructions for all unlocking services. Instructions about unfreeze are meant for people who have purchased a FACTORY SAMSUNG GENUINE UNLOCK CODES service, which include UNFREEZE code. If you have purchased a carrier unlock code (from you network provider): this service does not include UNFREEZE code. If you have FREEZED your phone, the unlock network code won't help to unfreeze, only unfreeze code will reset freezed phones.

-

Step 1: Determine the lock level of your Samsung

-

If you have ordered unlock codes from our website, you will have been pleased to see that every possible unlock code has been emailed to you.

The unlock codes emailed to you will look something like this:

Unfreeze: 12345678 NCK: 12345678 SCK: 12345678 SPCK: 12345678

Most networks only lock their Samsung handsets with the NCK lock enabled. Therefore you should only need to use this code when following the input instructions (see step 2). However some networks will have dual locks in place (whereby the NCK and another lock is enabled) or they may have just an alternative lock level such as SCK or SPCK.

It is best practice to be 100% sure which lock level is present on your handset, to do this follow these instructions:

Enter the following code into your handset while it is turned on and connected to its locked network.

By this we mean the connected to the network your handset is locked to (if you are locked to Orange, insert an Orange SIM card into your handset)

Once connected, enter this code: *#7465625#

A menu will be displayed that will resemble the following...

1. xxx Network lock

2. xxx Subset lock

3. xxx SP lock

(xxx = Value ON or OFF)

If only the Network lock is displayed saying ON then you will only need to use the NCK code with the instructions below. If you see the Subset lock value as ON then you will need the SCK code and if you see the SP lock value as ON you will need the SPCK code.

The unfreeze code we send you should only be needed if:

(a) You accidentally freeze your handset by entering too many incorrect codes or not following our unlock instructions accurately.

(b) Your handset displays the 'phone freeze' message whenever an alternative network SIM card is inserted into your phone prior to it being unlocked.

(c) You see the 'return for service' message.

Now you know the correct lock level of your handset and thus the correct code required for input, you may continue...

NB: If your handset does not accept the code to locate your lock level, simply move straight on to step 2 of this guide...

-

Step 2 : Input Instructions

-

Model : Samsung 3G handsets, Zxxx & Dxxx, A707, U900 Series

1- Switch ON your phone with a non accepted SIM Card,

2- Compose: #7465625*638*CODE# (or *#7465625*638*CODE#)

Model : Samsung Z105 & Z107

1 - Switch ON your phone with a not Accepted SIM Card,

2 - Compose : #7465625*638*CODE#

Model: Samsung i616 Jack or Blackjack2 from Fido Canada

1. Power ON your phone with a FIDO SIM Card that the phone is locked to

2. Type #7465625*638*

3. Network Lock Screen appear, enter UNLOCK CODE

4. Device is now unlocked

Model: Samsung A767 (Propel), A437, T459 (Gravity):

1 - Power on without SIM

2 - Type in #7465625*638*Unlock code# (8 digit unlock code*)

3 - Device should say: �Network Lock Deactivated�

4 - Phone may automatically reboot

Model: Samsung SGH-T459 (Gravity):

1. Power on without SIM

2. From the standby screen, use the dial pad to enter the number sequence

3. Type in #7465625*638*Unlock code# (8 digit unlock code*)

4. Device should say: �Network Lock Deactivated�

Model: Samsung i900 / Omnia

1 - Switch ON your phone with a NON Accepted SIM Card,

2 - Enter the pin code of this refused Simcard

3 - Device is now asking for another pin code

4 - Then enter the Unlock Code !

Model: Samsung Zxxx, Dxxx, Pxxx, T139 & F490 (ex : Z140, D520, P200, etc...)

1 - Switch ON your phone with a not Accepted SIM Card,

2 - Compose : #7465625*638*CODE#

Model: Samsung Z510 et Z320i et Z650i :

1 - Switch ON your phone with a not Accepted SIM Card,

3 - Compose **CODE#

Model : Samsung i450, i560 & i8910

1 - Switch ON your phone without SIM Card,

2 - Compose #PW+CODE+1#

The letter P appear after press 3 times quickly the button star ( * )

The letter W appear after press 4 times quickly the button star ( * )

The letter + appear after press 2 times quickly the button star ( * )

Model : Samsung i780

1. Insert an unaccepted SIM card

2. Enter the pin code to SIM card

3. At the top of screen an "exclamation mark" icon will appear

4. Click on "exclamation mark" icon

5. There will appear link "settings" - click on it

6. Virtual keyboard appears on screen with Enter PIN prompt.

7. Enter your 8-digit unlock code.

Model : Samsung i900

1. Insert an unaccepted SIM card

2. Enter the pin code to SIM card

3. At the top of screen a "lock" symbol with the letters NET will appear

4. You will also be presented with the options "OK"; "Dismiss"

5. Press the "OK" option

6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear).

7. Enter your 8-digit unlock code.

8. Your phone is now unlocked

Model : Samsung SGH-P207:

1. Reset to original factory setting by typing *2767*3855#, youre phone will reboot

2. Then insert a sim card that is from another network that your phone is not locked to.

3. An Wrong sim message will come up on the screen

4. When message appears type in* #9998*3323#

5. At this time a white screen will appear which says "exit"

6. Tap the rigth soft key, (occasionally it will not go to the next screen, if so press the down key)

7. From the menu that appears scroll down to the malloc Fail option, this will reboot, and normal service screen will appear.

8. Then type *0141# and press the green call key, Personalized will appear on the screen, and the name of the current sim card provider will appear on the screen.

9. Turn phone off, and then turn on

10. Go to menu by tapping left soft key, then settings in bottom right hand corner, then choose option number 7 security, then choose option number 6 Sim Lock, select option 1 disable

11. Then enter 00000000 (eight zeros), the message will come up sim lock disabled with a check mark, your phone is now unlocked to use with other carriers.

Model : All others Samsung

1 - Switch ON your phone with a not Accepted SIM Card,

2 - Phone will ask for "Password",

3 - You can now enter the Unlock Code we send to you.

OR (if phone show "Insert Correct SIM Card")

1 - Switch ON your phone with a not Accepted SIM Card,

2 - Compose : #0111*CODE#

OR

1 - Switch ON your phone with an unaccepted SIM Card,

2 - The Phone will then ask for the Code or Password

3 - You can now enter the Unlock Code we sent to you.

-

Step 3: Trouble Shooting

-

If your handset freezes for whatever reason and displays the 'Phone Freeze' or 'Return for Service' message then you will need to use the unfreeze code that was issued with your unlock codes.

Below you will see a list of instructions for entering the unfreeze code into different models of Samsung handsets.

Choose the handset instructions closest to your own model if it is not directly available. (i.e. if you have a Samsung i900, consider using the Samsung F480 unfreeze instructions).

NB: Unfreeze instructions are given as an added bonus to your unlock service. This is not the service you purchased and therefore it is provided free of charge.

Reasons for "Phone Freeze"

1. Inputting the unfreeze code rather than the unlock code into your handset.

2. Following the incorrect input procedure for your handset (these must be followed 100% correctly).

3. Handset automatically displaying "Phone Freeze" when an unaccepted SIM card is inserted into the handset, however when the accepted SIM card is inserted, the handset works fine.

Unlocking the phone when in "Phone Freeze"

In order to unlock your handset when the phone is frozen, you need to have access to the handset keypad.

Please note the following information is not provided with any guarantee or warranty of success as the unfreeze codes we provide are issued free of charge as an added bonus with certain Samsung unlocking services.

Option 1 (usually used with keypad Samsungs - U900 etc)

While an unaccepted SIM card is inserted

Enter the unfreeze code

Hit OK (either the left soft key, or in the middle of the touch-field)

Your handset may or may not display an unfreeze message

Now enter your unlock code (see step 1 above to determine this)

The phone should now unlock

or

Option 2 (usually used with touch screen Samsungs - F480 etc)

With Original SIM card in handset

Enter #7465625*638*UNFREEZE CODE

Phone Unfrozen

Input unaccepted SIM card into handset

Enter #7465625*638*UNLOCK CODE#

Your Phone should now unlock

or

Option 3 (possible with any Samsung handset)

While an unaccepted SIM card is inserted

Enter unfreeze code

Hit OK

Enter unlock code

Your phone should now unlock

Please note once again, these instructions for frozen handsets are used at the owners risk.

Unfreeze codes are supplied as a bonus for certain Samsung services and we make no warranty or guarantee of their success.

If in doubt, our customers may wish to have their handset manually unfrozen by a local independent mobile phone specialist before returning to use the unlock code we provided which is 100% accurate for your handset.

Instruction on how to unlock Samsung SGH-A107:

1. Turn ON your phone without Sim Card

2. Enter #7465625*638*Unlock Code#

3. Device should say "Network Lock Deactivated"

4. The phone may reboot and the unlock is completed

Samsung Secret Code


*#06# (Display IMEI number)


*#1234# (Display current firmware)


*#*#4636#*#* (Diagnostic and general settings mode)


*#*#7780#*#* (Factory soft reset)

or *#7780#

  • 2767*3855# (Factory hard reset to ROM firmware default settings)
  • 2767*4387264636# (To display product code)


*#272*imei#* (Display/change CSC code)

or *#272*HHMM#*


*#*#1472365#*#* (GPS test settings)


*#*#197328640#*#* (Service mode main menu)


*#12580*369# (SW & HW Info)


*#232337# (Bluetooth Address)


*#232331# (Bluetooth Test Mode)


*#232338# (WLAN MAC Address)


*#0228# (ADC Reading)


*#32489# (Ciphering Info)


*#2263# (RF Band Selection)


*#9090# (Diagnostic ConfiguratioN)


*#7284# (USB I2C Mode Control)


*#232339# (WLAN Test Mode)


*#0842# (Vibra Motor Test Mode)


*#0782# (Real Time Clock Test)


*#0673# (Audio Test Mode)


*#0*# (General Test Mode)


*#872564# (USB Logging Control)


*#4238378# (GCF Configuration)


*#0283# (Audio Loopback Control)


*#1575# (GPS Control Menu)


*#3214789650# (LBS Test Mode)


*#745# (RIL Dump Menu)


*#03# (NAND Flash S/N)


*#0589# (Light Sensor Test Mode)


*#0588# (Proximity Sensor Test Mode)


*#273283*255*3282*# (Data Create Menu)


*#34971539# (Camera Firmware Update)


*#526# (WLAN Engineering Mode)


*#746# (Debug Dump Menu)


*#9900# (System Dump Mode)


*#44336# (Sofware Version Info)


*#273283*255*663282*# (Data Create SD Card)


*#3282*727336*# (Data Usage Status)


*#7594# (Remap Shutdown to End Call TSK)


*#0289# (Melody Test Mode)


*#2663# (TSP / TSK firmware update)


*#528# (WLAN Engineering Mode)


*#7412365# (Camera Firmware Menu)

or *#*#34971539#*#*


*#80# (Unknown)


*#07# (Test History)


*#3214789# (GCF Mode Status)


*#272886# (Auto Answer Selection)


*#8736364# (OTA Update Menu)


*#301279# (HSDPA/HSUPA Control Menu)


*#7353# (Quick Test Menu)

  • 2767*4387264636# (Sellout SMS / PCODE view)


*#7465625# (View Phone Lock Status)

  • 7465625*782*# (Configure Network Lock NSP)
  • 7465625*27*# (Insert Network Lock Keycode NSP/CP)
  1. 7465625*27*# (Insert Content Provider Keycode)
  1. 7465625*782*# (Insert Partitial Network Lock Keycode)
  • 7465625*77*# (Insert Network Lock Keycode SP)
  1. 7465625*77*# (Insert Operator Lock Keycode)
  • 7465625*638*# (Configure Network Lock MCC/MNC)
  1. 7465625*638*# (Insert Network Lock Keycode)

Comments

1. On Wednesday, December 7 2016, 08:26 by Tony

Thank you so much.
Very helpful information.

2. On Sunday, January 15 2017, 04:03 by masochist

You made some decent points there. I checked on the web to
find out more about the issue and found most individuals
will go along with your views on this web site.

3. On Sunday, January 15 2017, 15:45 by pissoff

I am genuinely glad to glance at this weblog posts which includes tons of useful data, thanks for providing such statistics.

4. On Wednesday, January 18 2017, 09:13 by masterbation

Fastidious answers in return of this question with firm arguments and explaining the whole thing regarding that.

Add a comment

HTML code is displayed as text and web addresses are automatically converted.

They posted on the same topic

Trackback URL : http://unlockdealers.com/blog/index.php?trackback/3